Table of Contents
Advertisement
Num-
Symptom
ber
14
The desired
Additional optional
paper source
paper feed units are
cannot be
not installed, or the
selected.
3rd and 4th paper
drawers cannot be
selected from the
paper source options
on the Device
Options Setting tab.
Postcards, enve-
lopes or a non-stan-
dard size is selected
as the paper size.
15
The paper
Depending on the
source is not
application, the
as specified.
paper source speci-
fied from the printer's
Properties dialog
box is not applied.
Paper with the
appropriate size is
not loaded in the
specified paper
drawer.
16
The printing
Depending on the
orientation is
application, the print-
not as speci-
ing orientation speci-
fied.
fied from the printer's
Properties dialog
box is not applied.
Possible Cause
Check that the
additional paper
feed units are
installed, and
check the selected
settings on the
Device Options
Setting tab.
Check the paper
size.
Specify the paper
source by using
the Print command
in the application.
Load paper with
the appropriate
size into the speci-
fied paper drawer.
Specify the print-
ing orientation by
using the Print
command in the
application.
T-5
Remedy
Description
In order to specify the 3rd
or 4th paper drawer as
the paper source, addi-
tional optional paper feed
units must be installed. In
addition, if the 3rd and 4th
paper drawers are not
detected, they cannot be
selected from the paper
source options on the
Device Options Setting
tab.
If postcards are selected
as the paper size, the
"Auto Paper" and the 1st
through 4th paper draw-
ers cannot be selected.
The paper source can be
specified both from the
printer's Properties dia-
log box and by using the
Print command in most
applications; however,
depending on the applica-
tion, the paper source
selected from the printer's
Properties dialog box
may not be applied.
The printing orientation
can be specified both
from the printer's Proper-
ties dialog box and by
using the Print command
in most applications; how-
ever, depending on the
application, the printing
orientation selected from
the printer's Properties
dialog box may not be
applied.
Advertisement
Table of Contents
