Table of Contents
Advertisement
Num-
Symptom
ber
21
The binding
position can-
not be speci-
fied.
22
The binding
position is
not as speci-
fied.
23
Booklet bind-
ing cannot
be specified.
24
Booklet bind-
ing is not
performed as
specified.
25
Output tray
cannot be
selected.
Possible Cause
Double-sided print-
ing or booklet bind-
ing is not specified.
Hole punching or
stapling are speci-
fied with double-
sided printing.
The optional duplex-
ing document feeder
is not installed, or
the duplexing docu-
ment feeder is not
selected on the
Device Options Set-
ting tab.
The paper size of
each page is differ-
ent.
The optional mail bin
kit is not installed, or
the mail bin kit is not
selected on the
Device Options Set-
ting tab.
T-8
Remedy
Check that double-
The binding position and
sided printing or
the binding margin can
booklet binding is
only be specified if dou-
selected.
ble-sided printing or
booklet binding is speci-
fied.
Check if hole
If hole punching or sta-
punching or sta-
pling is specified with
pling are specified.
double-sided printing, the
binding position is
adjusted for the positions
of the punched holes or
staples.
Check that the
In order to specify booklet
duplexing docu-
binding, the optional
ment feeder is
duplexing document
installed, and
feeder must be installed.
check the selected
In addition, booklet bind-
settings on the
ing cannot be specified
Device Options
unless the duplexing doc-
Setting tab.
ument feeder is selected
on the Device Options
Setting tab.
✽ If multiple copies are
Check the paper
size.
Check that the
In order to specify the
mail bin kit is
output tray, the optional
installed, and
mail bin kit must be
check the selected
installed. In addition, the
settings on the
output tray cannot be
Device Options
specified unless the mail
Setting tab.
bin kit is selected on the
Device Options Setting
tab.
Check the paper
When using paper with a
size setting, and
size other than A4, A5,
check if the "Cover
JIS-B5, Invoice, Execu-
Mode" or "OHP
tive, Letter or 16K, the
Interleaving" func-
output tray cannot be
tion is selected.
selected.
Description
not printed correctly
with booklet binding,
refer to the information
on sorting.
Advertisement
Table of Contents
