Table of Contents
Advertisement
Num-
Symptom
ber
10
The printed
pages were
not sorted in
a crisscross
orientation.
11
Cover pages
and over-
head projec-
tor
transpar-
ency inter-
leaves are
not printed
correctly.
12
The paper
size cannot
be specified.
13
The paper
size is not as
specified.
Possible Cause
There are limitations
on the sizes of paper
that can be sorted in
a crisscross orienta-
tion.
Paper of the same
size is not loaded
horizontally and ver-
tically in separate
paper drawers.
The orientations
specified for the
paper drawers con-
taining the cover
pages (or overhead
projector transparen-
cies) and containing
the paper are not the
same.
If booklet binding is
specified, paper
larger than A4, post-
cards and enve-
lopes cannot be
specified.
Depending on the
application, the
paper size specified
from the printer's
Properties dialog
box is not applied.
T-4
Remedy
Check the paper
size, and check
that the paper is
loaded horizon-
tally and vertically.
Specify the same
orientations.
Check if the "Book-
Depending on the Finish-
let Creation" set-
ing setting that is
ting is selected.
selected, the paper size
cannot be specified.
Specify the paper
The paper size can be
size by using the
specified both from the
Print command in
printer's Properties dia-
the application.
log box and by using the
Print command in most
applications; however,
depending on the applica-
tion, the paper size
selected from the printer's
Properties dialog box
may not be applied.
Description
Advertisement
Table of Contents
