White Balance - Panasonic AG-DVX200PJ Operating Instructions Manual

To set the length of time before Focus Transition starts
Select the menu.
MENU
: [RECORD SETUP] # [FOCUS TRANSITION WAIT] # desired time
[0 SEC.]/[5 SEC.]/[10 SEC.]
Recording

White Balance

Automatic White Balance function may not reproduce natural colors depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.

A [WB]
B White Balance
1 AWB button
2 Jog dial
3 WHITE BAL switch
≥ Switch to Manual Mode.
1
Set the WHITE BAL switch to PRST.
≥ The White Balance mode set in [ WB PRESET ] will be displayed.
≥ If it will switch to A or B, the White Balance mode is set to [Ach] or [Bch].
2
Press the AWB button to switch the White Balance mode.
≥ The mode will be switched each time the AWB button is pressed:
[P3200K] # [P5600K] # [VAR ]
≥ If you set the White Balance mode to [ ATW ] in either of the following ways, even if you press the
AWB button, the White Balance mode cannot be switched:
j Pressing the USER button to which [ATW] is registered
j Setting the WHITE BAL switch to the position corresponding to your [ATW SET] setting
(l 152)
P3200K

(l 36)

(l 74, 78)
- 55 -

