Attaching The Tripod - Panasonic AG-DVX200PJ Operating Instructions Manual

Memory card camera-recorder
Hide thumbs Also See for AG-DVX200PJ:
Table of Contents

Advertisement

∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G:
optional) can be attached. Check in advance whether the microphone you wish to use can be
attached.
1
Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2
Attach an external microphone
(optional) to the microphone holder,
and tighten the microphone holder
screw.
3
Connect the external microphone to
the AUDIO INPUT1 terminal (XLR 3
pin).
≥ When wiring the microphone cable, use the
cable clamper of this unit.
≥ Keep the microphone holder screw, zoom
ring pin and INPUT terminal cap out of reach
of children to prevent swallowing.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.

∫ Attaching the tripod

≥ There are tripod mounting holes that are compatible with 1/4-20UNC and 3/8-16UNC screws.
Use the size that matches the diameter of the tripod's fixing screw.
Microphone holder attachment part
A
Microphone holder
B
Microphone holder mounting screws
C
D AUDIO INPUT1 terminal (XLR 3 pin)
E Microphone cable clamper
F Microphone holder screw
G External microphone (optional)
A INPUT terminal cap
- 14 -
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents