Panasonic AG-DVX200PJ Operating Instructions Manual page 155

[AF SENSITIVITY]
You can adjust the tracking sensitivity of Auto Focus.
≥ This function's default setting is "5".
[AF AREA WIDTH]
You can adjust the effective area width for Auto Focus according to the size of the subject.
[WFM]
[ON]/[OFF]
This enables/disables the Wave Form Monitor function.
[WFM TYPE]
[WAVE]/[VECTOR]/[WAVE/VECTOR]
This sets the type of Wave Form Monitor.
[WFM POSITION]
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
This sets the display positions of Wave Form Monitor.
[ZEBRA]
[ZEBRA 1]/[ZEBRA 2]*/[MARKER]*/[OFF]
* Not displayed when [ZEBRA 2]/[MARKER] is set to [ OFF ].
Switch between the zebra display and marker display.
≥ For information on the zebra display and marker display, refer to page 88.
[ZEBRA MODE]
This sets the display duration of the zebra display.
[CONTINUE]: Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]: Displays the zebra display for approximately 5 seconds.
(l 46)
(l 87)
(l 87)
(l 87)
(l
- 155 -
171)
(l 47)