Focusing (Manual Focus); White Balance Adjustment - Panasonic AG-CX8 Basic Operating Instructions Manual

Manual recording
AE level (exposure compensation)
1
Select the [SCENE FILE] menu → [AE LEVEL] → [ON].
2
Select the [CAMERA] menu → [SW MODE] → [REAR RING] → [IRIS/AE LEVEL].
3
When the <AUTO/MANU> switch is set to manual mode, use one of the
following operations to switch one of iris, gain, or shutter speed to auto.
≥ Press the <IRIS> button to switch to auto iris mode.
≥ Press the <GAIN> button to switch to auto gain mode.
≥ Press the <SHUTTER> button to switch to auto shutter mode.
4
Rotate the rear ring.
@
NOTE
0 When manual iris mode is enabled, the iris is adjusted when the rear ring is turned.

Focusing (manual focus)

1
Switch to <MANU> with the <AUTO/MANU> switch to enter manual mode.
2
Press the <FOCUS A/M/¶> button to switch to manual focus mode.
[AF] and [MF] switch each time you press the button. The focal point goes to infinity after
you press and hold the button, and then the manual focus mode is engaged.
3
Rotate the focus ring.

White balance adjustment

Follow the steps below to adjust the white balance
automatically.
≥ White balance/black balance adjustment is done
using the [AWB] USER button function. Make the
settings beforehand.
It is set in the [USER6] button icon at the time of
purchase.
To display the operation icon, touch and hold the
screen for approximately 2 seconds while the camera recording screen is being displayed.
50
DVQX2103 (ENG)
F1: F2: F3: F4:
＊＊＊＊＊ ＊＊＊＊＊ ＊＊＊＊＊
AWB
AREA
FACE DETECT
ZEBRA
MENU COUNTER
F5: F6:
＊＊＊＊＊ ＊＊＊＊＊
RESET