Panasonic AG-DVX200PJ Operating Instructions Manual page 62

≥ It is not possible to adjust the gain value using the GAIN switch and jog dial in the following
situations:
j During Freeze Frame
≥ If the gain value is increased, the noise on the screen increases.
≥ In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust
the gain. (l 59, 63)
∫ Changing the maximum possible gain value for Auto Gain Mode
Select the menu.
MENU
: [AUTO SW] # [AGC LIMIT] # desired setting
(When [GAIN/ISO DISPLAY CHG] is set to [GAIN])
[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]
(When [GAIN/ISO DISPLAY CHG] is set to [ISO])
[ISO1000]/[ISO2000]/[ISO4000]/[ISO8000]
Super Gain
You can use Super Gain by registering [SUPER GAIN] to a USER button. Super Gain allows you to
set a Super Gain value.
[GAIN/ISO DISPLAY CHG]
Please refer to page
≥ Switch to Manual Mode.
Press the USER button to which [SUPER GAIN] is registered or touch the
applicable USER button icon.
≥ To cancel Super gain, press the USER button or touch the USER button icon again.
∫ To change the gain value of Super Gain
Select the menu.
MENU
: [SW SETUP] # [SUPER GAIN] # desired setting
(When [GAIN/ISO DISPLAY CHG] is set to [GAIN])
[30 dB]/[36 dB]
(When [GAIN/ISO DISPLAY CHG] is set to [ISO])
[ISO16000]/[ISO32000]
≥ Super Gain is not available in the following cases:
j In Auto Gain Mode
j During Freeze Frame
j In High-sensitivity Recording Mode
(l 81)
(l 173) setting
[GAIN]
[ISO]
74 for details about setting the USER button.
(l 36)
(l 81)
(l
Gain value in Super Gain
[ISO16000] or [ISO32000]
148)
- 62 -
[30 dB] or [36 dB]