Lecording With Natural Colours (White Balance) - Panasonic NV-DS99EN Operating Instructions Manual

*P Sc
ENGLISH
#. •
mm
■
100) • ftifcttfiRT - &
*
S*hlfc±^»
1 w*t«is#sii!siigaatMNL](#ii!i).
*fcfcl3i[MNL]ft>R •
2 }$ae^ffl[w.B] o
smiw.B]® ' •
Recording with Natural Colours
(White Balance)
This Movie Camera automatically adjusts the white balance to
ensure that the pictures are recorded with natural colours. For
certain types of subjects and lighting conditions, however, this
Auto White Balance Adjustment Mode may not be able to ensure
natural colours (*♦ 99,100). In these cases, you can select either
one of the 3 preset modes explained below (indoor, outdoor, or
the last manually adjusted white balance setting), or you can
manually adjust the white balance (-* 52).
1 Set the Mode Selector Switch to [MNL].
The [MNL] Indication appears.
O SftJKIR
(te&mTmmmu-)
Qmmm-x)
0 (b&i) (-> 52)
•&j»[POWER](m3S)0SIIIM|E[CAMERA](atMIMt)*
ffi • fltffe&ft&TflUNM • 8l*fc7fc5lT«SHSttjtK*
T ' )H[POWER](m)ii)^llgfeS^[CAMERA](tt»|^m)
B# - =
• $Q*®j|S[CAMERA FUNCTIONS][DIGITAL EFFECT]
(i?{2^m)Tlgm^W[EFFECT1 ] (ftH 1 )
[GAINUP](&ffiMOftS) -
|m
[EFFECT2](^m2)Ji
t&®£[SEPIA](»fejKfiB)# [B/W](*6!K*) •
• 3t - te-12
at - °
rasnae^mifeiKm
m^[w.b]m - * m •
tbSd])M^± • • )t«mmnNfifts^[AUTO] •
2 Press the White Balance Button [W.B].
Repeatedly press the [W.B] Button to select the desired
White Balance Mode.
The modes change in the following order:
0 Indoor Mode
(recording under incandescent lamp) (^=)
0 Outdoor Mode (■#-)
o Last manually adjusted White Balance setting
(tAd)(->52)
0 Automatic White Balance Adjustment
(no indication)
• Be sure to remove the Lens Cap before setting the
[POWER] Switch to [CAMERA], If the Lens Cap is
attached to the Lens when you set the [POWER] Switch
to [CAMERA], the automatic white balance adjustment
may not be precise.
• If you have set [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu to
[GAINUP], or if you have set [EFFECT2] to [SEPIA] or
[B/W], it is not possible to change the white balance.
• To change the white balance mode, the Movie Camera
must be set within the optical zoom range (1 x-12x). If
you try to adjust it in the digital zoom range, the [tAi]
Indication flashes.
Returning to the Auto White Balance Adjustment Mode
Press the [W.B] Button repeatedly until none of the White Balance
Mode Indications (E&-], [-£], [^]) are displayed any more. Or,
set the Mode Selector Switch to [AUTO].
-R1-