Panasonic AG-DVX200PJ Operating Instructions Manual page 134

[KNEE APE LEVEL]
This sets the detail level of high luminosity areas (extremely bright areas).
1 Touch [KNEE APE LEVEL].
2 Touch the desired setting item.
[0]/[1]/[2]/[3]/[4]/[5]
3 Touch [EXIT] to exit the menu screen.
[RB GAIN CONTROL SETTING]
This adjusts the color balance for each position of the WHITE BAL switch. You can also set whether
or not to apply the color balance settings to Auto White Balance/Auto Black Balance.
≥ These settings do not work when the White Balance mode is set to [ATW].
1 Touch [RB GAIN CONTROL SETTING], and select the desired item.
[AWB PRE]: Setting for the PRST position of the WHITE BAL switch
[AWB A]: Setting for the
[AWB B]: Setting for the
2 Touch the desired setting item.
[R GAIN]:
[B GAIN]:
[GAIN OFFSET]*:
* Displayed only if you touch [AWB A] or [AWB B] in Step 1.
3
(If you have touched [R GAIN]/[B GAIN] in Step 2)
Touch /
≥ You can select a value between s30 and r30.
≥ Touch [RETURN].
(If you have touched [GAIN OFFSET] in Step 2)
Touch [ON] or [OFF].
[ON]: Maintains the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto
Black Balance is used.
[OFF]: Resets the [R GAIN] and [B GAIN] settings when Auto White Balance/Auto Black
Balance is used.
≥ To make additional changes, repeat Steps 2s3.
4 Touch [EXIT] to exit the menu screen.
≥ The default settings that are assigned to [SCENE1] in [CUSTOMIZE SCENE] are as follows:
j [R GAIN]: "0"
j [B GAIN]: "0"
j [GAIN OFFSET]: [OFF]
A
position of the WHITE BAL switch
B
position of the WHITE BAL switch
Adjusts the intensity of red.
Adjusts the intensity of blue.
Sets whether to maintain or reset the [R GAIN] and [B GAIN] settings
when Auto White Balance/Auto Black Balance is used.
to adjust the color balance.
- 134 -