Panasonic AG-DVX200PJ Operating Instructions Manual page 87

WFM
≥ Register "WFM" to a USER button.
This function displays waveforms on the LCD monitor.
Press USER button in the recording screen.
≥ When [WFM TYPE] is set to [WAVE] or [VECTOR], each press of the button enables/disables
WFM.
≥ When [WFM TYPE] is set to [WAVE/VECTOR], each press of the button switches the setting.
WAVE (wave display) # VECTOR (vector display) # OFF
≥ If you have enabled WFM by touching the applicable USER button icon, set [WFM] to [OFF] to
disable it.
≥ This function is not available in the following cases:
j When using the viewfinder
j When recording yourself
j When using Focus Assist
≥ [WFM] will be canceled in the following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
∫
To change the type of
Select the menu.
MENU
: [SW SETUP] # [WFM TYPE] # desired setting
[WAVE]:
[VECTOR]:
[WAVE/VECTOR]:
≥ This function is not available in the following cases:
j When using Focus Assist
j During Freeze Frame
j When color bars are displayed
∫ To change the display position of
Select the menu.
MENU
: [SW SETUP] # [WFM POSITION] # desired setting
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
≥ You can also change the waveform position to the upper left, upper right, bottom left or bottom
right by performing one of the following operations while a waveform is displayed:
j Rotating the jog dial
j Sliding the waveform while touching it.
(l 74)
(l 28)
(l 48)
WFM
Displays waveforms as waves.
Displays waveforms as vectors.
Switches the setting each time the applicable USER button is pressed.
(l 48)
(l 81)
(l 95)
- 87 -
j During Freeze Frame
j When color bars are displayed.
WFM
(l 81)
(l 95)
(l 122)