Telephone Line Settings - Konica Minolta bizhub C352 User Manual

10

10.17 Telephone Line Settings

For the IP address fax function, set the [Number of Redial] and the [Redial
Interval]. These are normally shared with the fax function.
Other items are not used for the IP Address Fax.
!
Detail
For the network fax function, set the [Number of Redial] and the [Redial
Interval]. For other items, see "User's Guide (Facsimile Operations)".
Item
Number of Re-
dials
Redial Interval
*1
The setting value is different depending on the country.
*
indicates factory default setting.
Telephone Line Settings
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
10-50
Description
Set the number of redials when no re-
*1
sponse is available due to the other party
being busy.
Set the intervals between the redials.
Utility Mode
Available value
*
0-7 (3 times )
*
1-15 (3 min. )
Network Fax