Fax Active Screen - Konica Minolta bizhub C352 User Manual

Utility Mode
10.4

Fax Active Screen

Set the message in transmission if it is displayed on the screen or not.
Item
TX Display
RX Display
*
indicates factory default setting.
Fax Active Screen
1
Open the User Setting screen (See "Entering User Setting" on
page 10-2).
2
Press [Display Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Display
Setting], enter 2 through the numeric keypad.
3
Press [Fax Active Screen].
Network Fax
Description
Set the message in [Transmission] if it is
displayed on the screen or not.
Set the message in [Receive] if it is dis-
played on the screen or not.
10
Available value
*
ON / OFF
*
ON / OFF
10-19