Copy To Library - Akai DD1500 User Manual

EDITING - 14

COPY TO LIBRARY

You may also copy the edit region/cue(s) to a library. To do this, press either F5 or F6 -
. If this is the first time you have copied to a library, you will receive a
screen something like this:
If the selected library is a new one, then it will be empty as shown above.
When you press F5 or F6 - - it allows you to copy the selected edit
region/cue(s) into a library for use later on. Prior to copying the edit region/cue(s) into the
library, you may give it a new name. To name a clip prior to copying, press the NAME key
on the top panel. The NEW CLIP NAME field will 'open':
The cue's name will be shown and you may enter a new ten character name if you wish.
Press EXECUTE to complete the naming process and EXECUTE again to copy the edit to
the library. If you are using a computer keyboard with the DL1500, just start typing in the
new name and press RETURN to complete the naming process and RETURN again to
copy the edit to the library. There is no need to specifically press the NAME key.
If the library shown is not the one you want to copy to, assuming you have more than one
library on disk, move the cursor up to the top line until it is resting on the library name (in
this case 'NewLib 1') and then use the DATA +/- keys to select a different library. You will
receive the message:
You should respond accordingly using EXECUTE or EXIT.
Once the correct library to copy to is selected, finish the action off by pressing EXECUTE.
If, for some reason, you change your mind, press EXIT to return to the main COPY TO
CLIPBOARD page.
Version 2.00 - March, 1996 Page 95