Undoing A Nudge; Nudge Set (Shift+Nudge) - Akai DD1500 User Manual

To select the whole track to nudge, press and hold SYNC then press IN and OUT
together. This will mark the whole of the selected track and it will be highlighted green on
the external monitor. You may, of course, have multiple tracks selected for editing.
However you mark it, as soon as you press the DATA ENTRY + or - keys, the selected
audio will slip forwards or backwards in increments of one frame or you may also use the
numeric keypad's +/- keys to slip in smaller increments of sub-frames (however, please
see below - NUDGE SET - as you can set the increments by which the audio will be
nudged). If you are in the middle of a cue, as soon as you nudge it, the cue will be split
and the audio slipped.

UNDOING A NUDGE

You cannot undo a nudge directly within the NUDGE pages but, when you leave the
page, if you feel the result was unsuccessful, you may undo it. When in the NUDGE page,
if you feel an edit is not working well, leave NUDGE temporarily, hit UNDO and re-enter
NUDGE to have another attempt.

NUDGE SET (SHIFT+NUDGE)

The NUDGE key's shift function, SET, allows you to set by how much the +/- keys will
nudge. Pressing SHIFT+NUDGE will display this screen:
The fields on this page are:
DATA +/- KEYS
NUMERIC +/- KEYS
Pressing EXIT will leave this screen at any time.
Version 2.00 - March, 1996
Here you may set the amount the DATA +/- keys will
nudge. The usual selection (and hence the default) is 1
frame. You may select from 1-25 frames (or 24 or 30
depending on the frame rate of the timecode type you are
using).
This field allows you to set the amount by which the
numeric keypad's +/- keys will nudge. The default is 1 sub-
frame and you may select from 1-9 sub-frames.
EDITING - 14
Page 141