14 - EDITING
TRIMMING A SPLICE EDIT
When two cues are butted together or overlapping, you may move the splice point around
in TRIM. To select a splice for trimming, place the splice/overlap you are interested in on
(or very close to) the NOW time and press TRIM to receive the 'trim entry' page:
Now press the SYNC key. If the splice is not on or close to the NOW time, you will receive
the prompt:
You should move the splice point onto the NOW time or nearer to it.
Once you have successfully selected SPLICE, you will receive this screen:
Page 132
Version 2.00 - March, 1996