Table of Contents
Advertisement
8 - GETTING AROUND THE DD1500
TRACK ZOOM KEYS
The CURSOR keys are also used with the SHIFT key to zoom in and out on tracks.
SHIFT plus the CURSOR
simultaneously to switch between maximum horizontal zoom in and a zoom out of your
choice by pressing SHIFT+CURSOR
level of your choice - pressing SHIFT and the CURSOR
you between that level and maximum zoom.
SHIFT plus the CURSOR
zoom in, showing fewer and fewer tracks whilst SHIFT+
tracks. As you zoom in, so you will see tracks 1-12, 1-8, 1-4, 1 and 2 and finally, 1
displayed on the external monitor. However, you may want to zoom in on tracks 5 and 6.
This easily achieved by pressing SHIFT plus the PLAY SELECT keys 5 and 6. This will
place tracks 5 and 6 as the top two tracks in the GRID. Any tracks may be selected in this
way. For a four track zoom, you may want to see tracks 2, 5, 7 and 8 so hit SHIFT+PLAY
SELECT 2, 5, 7, 8. To clear the display so that tracks 1-16 are shown sequentially again in
the GRID, press SHIFT plus either of the CLEAR keys. To select tracks 9-16 in this way,
use SHIFT plus the lower RECORD/EDIT SELECT keys. Any combination of tracks 1-8
and 9-16 can be selected for display in zoom.
NOTE: This function affects the display only - it does not route different tracks to different
outputs.
Several other key combinations are possible. These are:
SHIFT+EDIT
SHIFT+REC/#
SHIFT+TR1-8
SHIFT+TR9-16
SHIFT+CURSOR UP/DOWN
NOTE: In the SHOW page, you may set the DL1500 so that tracks selected for edit are
those that are shown on the VGA as you zoom in. For example, with tracks 3 and 4
selected for edit, when you zoom to two tracks, 3 and 4 would automatically be placed at
the top of the screen. Please see the section that describes the SHOW functions for more
details on this.
NUMERIC KEYPAD
The NUMERIC KEYPAD has two main functions. It is used to store and recall up to 10
edits in what we call the EDIT CLIPBOARD (see the section on editing that describes this).
It is also used for timecode and numeric entry.
EDITING NUMERIC FIELDS
To edit number fields, you can just type the number directly followed by EXECUTE. You
may also use the DATA ENTRY +/- keys to increment/decrement through the values.
If you make a mistake, press EXIT - this will restore the parameter's previous value.
To clear a number field, press the NUMERIC KEYPAD's CLR key followed by EXECUTE.
This may be used to type in a value 'from scratch' or to clear a mistake and start over
again.
Page 38
allow horizontal zoom in/out. You may also use these keys
keys simultaneously. To do this, zoom in to the
keys allow you to zoom in vertically on tracks. SHIFT+ will
All tracks selected for EDIT are automatically
placed at the top of the GRID.
All tracks selected for RECORD are placed at the
top of the GRID
This places tracks 1-8 at the top of the GRID.
This places tracks 9-16 at the top of the GRID.
This will zoom right into any tracks selected for edit.
Pressing it again will take you back to view the last
selected vertical zoom level.
keys together will now switch
will zoom out, showing more
Version 2.00 - March, 1996
Hide quick links:
Advertisement
Table of Contents
