Printing Out The Disk Directory - Akai DD1500 User Manual

PRINTING OUT THE DISK DIRECTORY

Pressing PRINT in DISK gives this screen display:
The parameters are:
PRINT
DISK INFO
Assuming everything is connected properly and the printer is switched on and on-line, you
will see a highlighting progress display as the disk directory is being printed. If you wish to
cancel printing, press EXIT.
NOTE: The highlighting actually shows the printer data being spooled off to the printer's
memory, not the actual printer progress. In other words, even though the highlighting has
stopped, the printer will continue to print out the remaining contents of its memory. Also,
please note that for very short printouts, the highlighting may be so fast, you won't notice
it and then printer will start printing.
If there is a problem, you will receive an error message (these are listed later).
Version 2.00 - March, 1996
Allows you to select what it is you want to printout. The
options are:
PROJECTS ONLY
LIBRARIES ONLY
PROJS+LIBS
You may select whether the information relating to the disk
(i.e. that shown in the UTILS - INFO page) is shown in the
printout.
PRINTER FUNCTIONS - 24
This will print only the projects on
the selected disk.
This will print only the libraries on
the selected disk.
will print out a list of the projects
and the libraries on the selected
disk.
Page 269