Akai DD1500 User Manual page 36

4 - CONNECTIONS - POWERING UP
If everything seems alright but the problem persists, press any key on the DL1500. You
will be taken to the SYSTEM LOAD O/S screen. This is normally used for upgrading your
system software but, in circumstances like this, can be used to restart the system.
Pressing any key will display this screen:
The screen shows that the current operating system in the DD1500m is Version 0.00. In
other words, because the DL1500 has not been able to find the DD1500m on the system,
it doesn't know what version software is in it. Don't worry about this for the moment - press
RESTART (F3/F4). This will go through the boot up process again as described above.
If this doesn't work, try powering everything down and trying again. If you still find that you
cannot boot up, please contact your dealer immediately.
But take heart! This should not happen and if you do have problems, you will probably
find it is nothing more serious than a damaged AKAINET BNC cable or that the AKAINET
termination has been incorrectly set. If these are alright, however, but the problem
persists, you should contact your dealer immediately.
Page 28 Version 2.00 - March, 1996