Planet EPL-2000 User Manual page 60

Port Enable:
Ingress Filter:
Permit Frame Type:
Ingress Rate Control:
Ingress Rate Control Rate
[0~1000000]
As GEPON OLT EPL-2000 SFP Ports of GE1 and GE2 are configured in 1000Mbps Forced
Mode, the switch's SFP Ports should also be changed to 1000Mbps Forced Mode if the
connection is to be established successfully,. Otherwise, the connection might fail.
Vlan-access: Only allow Untagged frames
Vlan-Trunk: Allows Tagged and Untagged frames.
The port can be set to disable or enable mode.
If the port is set as 'Disable', it will not receive or transmit any packet.
Enable ingress filtering for a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is not
a member of the classified VLAN of the frame, the frame is discarded.

Enabled

Disabled
By default, ingress filtering is disabled (no checkmark).
Determines whether the port accepts all frames or only VLAN tagged frames.
This parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded.
Options:

allType

tagged
By default, the field is set to allType.
There are four kinds of Limit Rates:
1. LimitAll
2. LimitB
3. LimitM
4. LimitBMUC
Set up the Rate of Ingress Rate.
60
User's Manual of EPL-2000