Additional Disk Installation Procedure - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Installing Optional Products
5.1 Installing Disks
5.1.4

Additional Disk Installation Procedure

This section describes how to install additional disks in the ETERNUS DX Disk storage system.
■
2.5" disks
Procedure
1
2
3
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
• If additional disks are installed in a way other as described in this
section, damage and/or device failure or electrical shock may occur.
Do Not
• Do not install disks that are for use in other devices.
Check that all components of the ETERNUS DX Disk storage system are in
normal status, using the Storage System Status screen of ETERNUS Web GUI.
Wear a wrist strap or touch a metal part to discharge the human body's natural
static electricity.
Remove the dummy disk unit from the slot in which the disk is to be installed.
Simultaneously push into the tabs in the upper and lower parts of the dummy disk unit, and
pull it straight out of the disk slot.
Dummy disk unit
Tabs
The removed dummy disk unit should be retained for future use.
IMPORTANT
Copyright 2011 FUJITSU LIMITED
59
P3AM-5512-02ENZ0