Chapter 5 Installing Optional Products
>
5.1 Disk Installation
5.1.3
Disk Installation Positions
3.5" disks can be installed in the front of the controller enclosure or drive enclosure, as shown in
Figure
Figure 5.1
IMPORTANT
5.1.4
Additional Disk Installation Procedure
This section describes how to install additional disks in the ETERNUS DX60/DX80.
P3AM-3042-03ENZ0
ETERNUS DX60/DX80 Disk storage system User Guide
5.1.
Slot#8
Slot#9
Slot#4
Slot#5
Slot#0
Slot#1
Position of 3.5" disk slots
Install disks starting from Slot#0, without skipping any slots.
Do Not
WARNING
•
Do not install any disks that are not FUJITSU authorized, as they
may damage the device and/or cause fire or electrical shock.
•
Do not damage or modify the internal cables or ETERNUS DX60/
DX80 when installing the disks, as this may damage the device and/
or cause fire or electrical shock.
Do
CAUTION
•
If additional disks are installed in a way other than by the methods
described herein, damage to the device and/or failure or electrical
shock may occur.
•
Disks which contain RAID groups or volumes, or disks which are hot
spares should not be moved to another slot.
Slot#10
Slot#11
Slot#6
Slot#7
Slot#2
Slot#3
161
Copyright 2009 FUJITSU LIMITED