Additional Drive Installation Procedure - Fujitsu ETERNUS DX200F Operation Manual

Chapter 4 Maintaining Optional Products
4.1 Installing Additional Drives
■
About Shock
4.1.3

Additional Drive Installation Procedure

This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
Do Not
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
•
Do
• If components are installed in a way other as described in this section, damage
and/or device failure or electrical shock may occur.
Do Not
• Do not install drives that are for use in other devices.
31
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0