4.
Component Expansion/Function Enhancement
Installing Additional Drives
■
About Static Electricity
■
About Shock
Additional Drive Installation Procedure
This section explains how to install optional drives in the ETERNUS DX.
Drives can be installed in any slots.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Do Not
Do not touch the surface of the board of the drives.
•
Do
•
When handling drives, wear a wrist strap or touch a metal part to discharge the hu-
man body's natural static electricity. Failure to discharge static electricity may cause
failure in the ETERNUS DX.
•
Leave the drive in its package until ready to install it.
Do Not
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
•
mat or other soft material to cushion the drives against physical shocks.
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
•
48
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0