Fujitsu Eternus DX60 S2 User Manual page 60

Chapter 5 Installing Optional Products
5.1 Installing Disks
4
4-1
4-2
4-3
4-4
5
6
7
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Install the new disk.
Press the catch on the disk lock lever to unlock it.
Catch
Lock lever
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
Hold the disk with both hands to protect against jarring.
IMPORTANT
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
Lock lever
Check that the newly installed disk's DISK READY LED lights up green after
approximately 30 seconds.
Repeat Step 3 and Step 4
If a wrist strap is used, remove the wrist strap.
On the Storage System Status screen of ETERNUS Web GUI, check that the
added disks have been recognized.
Copyright 2011 FUJITSU LIMITED
for each additional disk.
60
P3AM-5512-02ENZ0