Repositioning The Chamber Tube Mounting Brackets; Repositioning The Chamber Tube Mounting Bracket Socket Screws - Invacare Top End Crossfire T6 Owner's Operator And Maintenance Manual

SECTION 8—WHEELS

Repositioning the Chamber Tube Mounting Brackets

NOTE: For this procedure, refer to FIGURE 8.7.
1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
2. Loosen but do not remove the four socket screws and washers that secure the two
chamber tube mounting brackets to the chamber tube supports.
3. Slide the chamber bar forward or backward to adjust the wheelbase length to the
desired position.
4. Securely tighten the four socket screws and washers that secure the two chamber tube
mounting brackets to the chamber tube supports.
5. Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
Chamber
Tube Support
Chamber Tube
Mounting Bracket
Socket Screws
and Washers
FIGURE 8.7 Repositioning the Chamber Tube Mounting Brackets

Repositioning the Chamber Tube Mounting Bracket Socket Screws

When reinstalling the two socket screws, ensure one empty mounting position
remains between the two socket screws.
NOTE: For this procedure, refer to FIGURE 8.8.
1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
2. Refer to Socket Screw Mounting Positions in FIGURE 8.6 to determine which socket
screw(s) must be moved and to which mounting positions.
3. Remove the four socket screws, washers, and lock washers from both chamber tube
mounting brackets.
™
Crossfire Series Wheelchairs
Chamber Tube
Mounting Bracket
CAUTION
46
Washers
Socket Screws
Chamber
Tube Support
Chamber
Tube
Part No 1134872