Repositioning The Camber Tube Mounting Brackets; Repositioning The Camber Tube Mounting Bracket Socket Screws - Invacare Crossfire T6 Owner's Operator And Maintenance Manual

SECTION 8—WHEELS

Repositioning the Camber Tube Mounting Brackets

NOTE: For this procedure, refer to FIGURE 8.7.
1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
2. Loosen but do not remove the four socket screws and washers that secure the two
camber tube mounting brackets to the camber tube supports.
3. Slide the camber bar forward or backward to adjust the wheelbase length to the
desired position.
4. Securely tighten the four socket screws and washers that secure the two camber tube
mounting brackets to the camber tube supports.
5. Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
Camber
Tube Support
Camber Tube
Mounting Bracket
Socket Screws
and Washers
FIGURE 8.7 Repositioning the Camber Tube Mounting Brackets

Repositioning the Camber Tube Mounting Bracket Socket Screws

When reinstalling the two socket screws, ensure one empty mounting position
remains between the two socket screws.
NOTE: For this procedure, refer to FIGURE 8.8 on page 47.
1. Remove the rear wheels. Refer to Removing/Installing Rear Wheels on page 40.
2. Refer to Socket Screw Mounting Positions in FIGURE 8.6 to determine which socket
screw(s) must be moved and to which mounting positions.
3. Remove the four socket screws, washers, and lock washers from both camber tube
mounting brackets.
™
Crossfire Series Wheelchairs
Camber Tube
Mounting Bracket
CAUTION
46
Washers
Socket Screws
Camber Tube
Support
Camber
Tube
Part No 1134872