Wan & Dmz Settings; Ipv4 Only - Planet SG-4800 User Manual

6.1.4 WAN & DMZ Settings

6.1.4.1 IPv4 Only

WAN Setting
Item
Interface
Connection Type
Config
Obtain an Automatic IP automatically
This mode is often used in the connection mode to obtain an automatic DHCP IP. This is the device
system default connection mode. It is a connection mode in which DHCP clients obtain an IP address
automatically. If having a different connection mode, please refer to the following introduction for selection of
appropriate configurations. Users can also set up their own DNS IP address. Check the options and input the
user-defined DNS IP addresses.
Description
An indication of which port is connected.
Obtain an IP automatically, Static IP connection, PPPoE (Point-to-Point
Protocol over Ethernet), PPTP (Point-to-Point Tunneling Protocol) or
Transparent Bridge.
A modification in an advanced configuration: Click Edit to enter the advanced
configuration page.
Gigabit SSL VPN Security Router User's Manual
- 24 -