Table of Contents
Advertisement
Chapter 3: Hardware Installation
In this chapter we are going to introduce hardware interface as well as physical installation.
3.1 Installing the Device on a Standard 19" Rack
We suggest to either place the device on a desk or install it in a rack with attached brackets. Do not place
other heavy objects together with the device on a rack. Overloading may cause the rack to fail, thus causing
damage or danger.
Each device comes with a set of rack installation accessories, including 2 L brackets and 8 screws. Users can
rack- mount the device onto the chassis.
Refer to the figure below for the device installation onto a 19" rack:
In order for the device to run smoothly, wherever users install it, be sure not to obstruct the vent
on each side of the device. Keep at least 10cm space in front of both the vents for air
Attention
convection.
Gigabit SSL VPN Security Router User's Manual
- 9 -
Advertisement
Table of Contents
