Table of Contents
Advertisement
Item
Description
Aggressive Mode:
This mode is mostly adopted by remote devices. The IP connection is designed to
enhance the security control if dynamic IP is used for connection.
NAT Traversal
This option allowed the VPN connection can penetrate the NAT which in front of the
router.
D ead Peer
If this option is selected, the connected VPN tunnel will regularly transmit HELLO/ACK
Detection (DPD)
message packet to detect whether there is connection between the two ends of the
VPN tunnel. If one end is disconnected, the device will disconnect the tunnel
automatically and then create new connection. Users can define the transmission time
for each DPD message packet, and the default value is 10 seconds
10.1.2. PPTP Server
It supports the PPTP of Window XP/ 2000 to create point-to-point tunnel protocol for single- device users to
create VPN connection.
Gigabit SSL VPN Security Router User's Manual
- 110 -
Advertisement
Table of Contents
