Table of Contents
Advertisement
offers a few items for remote settings. Please select and set appropriate parameters:
Group Type
(1) IP address
This option allows the only IP address which is entered to build the VPN tunnel.
Reference: When this VPN tunnel is connected, computers with the IP address of
192.168.2.1 can establish connection.
(2) Subnet
This option allows local computers in this subnet can be connected to the VPN tunnel.
Reference: When this VPN tunnel is connected, only computers with the session of
192.168.2.0 and with subnet mask as 255.255.255.0 can connect with remote VPN.
IPSec Setup
If there is any encryption mechanism, the encryption mechanism of these two VPN tunnels must be identical
in order to create connection. And the transmission data must be encrypted with IPSec key, which is known
as the encryption "key". The device provides the IKE automatic encryption mode- IKE with Preshared Key
(automatic).
Encryption Management Protocol
When users set this VPN tunnel to use authentication mode, users must set the parameter of this exchange
password with that of the remote
Gigabit SSL VPN Security Router User's Manual
- 100 -
Advertisement
Table of Contents
