Table of Contents
Advertisement
11.9.1
Assign IP Range for Virtual Passage
A virtu
al passage is a type of point-to-point SSL client connection. When remote u
connect, SSL VPN will establish a virtual web interface. For this reason, you will need to set SSL VPN's secure
tunnel client address range so it does not conflict with you
is 192
.168.1.200 to 192.168.1.205.
Unified IP Management:
The Unified IP Management configuration window can set LAN IP range, DHCP IP range, SSL virtual passage IP
range, and PPTP IP address
Whe
n the client uses SSL secure tunnel to connect to SSL VPN, SSL VPN will assign a LAN IP address to the
user. You can use SSL VPN's supported SSL tunnels to adju
to provide ample LAN IP the SSL secure tunnel clients. Ensure that the secure tunnel IP range doesn't conflict
with
the DHCP IP range or the PPTP secure tunnel IP range.
range.
Gigabit SSL VPN Security Router User's Manual
r company's Internet DHCP IP. Default for 5 SSL users
st "client start addresses" and "client end addresses"
- 143 -
sers use a secure tunnel to
Advertisement
Table of Contents
