Introduction - Symbol MiniScan MS XX07 Series Integration Manual

Introduction

This chapter provides RS-232 host information for setting up the MiniScan XX07 Series
scanner. The RS-232 interface is used to attach the MiniScan scanner to point-of-sale
devices, host computers, or other devices with an available RS-232 port (e.g., com port).
If your host is not listed in
device. Refer to the documentation for the host device.
This scanner uses TTL RS-232 levels which interfaces with all PC's with no additional
hardware.
Note: Particularly noisy electrical environments may require a cable with
an RS-232 transceiver. To obtain this cable contact the Symbol
Support Center.
Throughout the programming bar code menus, asterisks (
*
Indicates Default
Chapter 11
RS-232 Interface
Table 11-2, set the communication parameters to match the host
*
Baud Rate 9600
*
) indicate default values.
Feature/Option
11-1