Scanning Tips
When scanning, make sure the symbol to be scanned is within the scanning range. See
Calculating the Usable Scan Length Method
beam. The green decode LED lights to indicate a successful decode.
Scan the Entire Symbol
•
The scan beam must cross every bar and space on the symbol.
•
The larger the symbol, the farther away the scanner should be positioned.
•
Position the scanner closer for symbols with bars that are close together.
RIGHT
012345
Position at an Angle
Do not position the scanner exactly perpendicular to the bar code. In this position, light can
bounce back into the scanner's exit window and prevent a successful decode.
on page 2-11. Align the bar code with the scan
WRONG
Scanning
012345
3-5