Table of Contents
Advertisement
Parameter Menus
Decode UPC/EAN Supplemental Redundancy
Parameter # 50h
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number
of times (from 2 to 30) a symbol without supplementals is decoded before transmission.
Five or above is recommended when decoding a mix of UPC/EAN symbols with and
without supplementals, and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar
codes beginning on
page
10-132. Enter a leading zero for single digit numbers. To change
the selection or to cancel an incorrect entry, scan the
Cancel
bar code on
page
10-134.
Decode UPC/EAN
Supplemental Redundancy
10-37
Advertisement
Table of Contents
