Table of Contents
Advertisement
Parameter Menus
Set Lengths for Codabar
Parameter # L1 = 18h, L2 = 19h
The length of a code refers to the number of characters (i.e., human readable characters)
the code contains, including start or stop characters. Lengths for Codabar may be set for
any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected
length. For example, select Codabar One Discrete Length, then scan 1, 4, to decode only
Codabar symbols containing 14 characters. Numeric bar codes begin on
page
10-132. To
change the selection or cancel an incorrect entry, scan the
Cancel
bar code on
page 10-
134.
Codabar - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two
selected lengths. For example, select Codabar Two Discrete Lengths, then scan 0, 2, 1,
4, to decode only Codabar symbols containing 2 or 14 characters. Numeric bar codes
begin on
page
10-132. To change the selection or cancel an incorrect entry, scan the
Cancel
bar code on
page
10-134.
Codabar - Two Discrete Lengths
10-85
Advertisement
Table of Contents
