Table of Contents
Advertisement
Introduction
Interface Board - The interface board adapts the scan engine's interface into usable
signals and data for the intended host. It also contains a beeper and red/green LED for
audio/visual feedback, and provides for an external trigger and external beeper.
The interface board converts the scan engine's data to Synapse, USB, or TTL level RS-
232. A separate host adapter cable (p/n 25-62186-xx) is available to convert the TTL level
RS-232 output to standard RS-232 levels. All interface types are auto-detected based on
the host cable attached.
DB9 - The DB9 connector provides a sealed outlet for the various interface signals used
between a MiniScan scanner and the host. It also maintains pin compatibility with the
previous generation LS 1220 MiniScan host cables.
1-5
Advertisement
Table of Contents
