Set Defaults - Symbol LS7808 Quick Reference Manual

14

Set Defaults

When scanning the desired bar code, cover other bar code on
NOTE
page.
Scanning this bar code sets all parameters to their factory default values.
Host Type Selection
If a Synapse cable (i.e., part number STIxx-xxxx) is used, the scanner
autocoders the type of host, so there is no need to scan host type
selection bar codes.
If a USB interface is used, the scanner autocoders the USB and defaults
to the HID keyboard interface. See
host type. Refer to the LS7808 Product Reference Guide, p/n 72-69531-XX,
for additional USB host types.
If a Keyboard Wedge, RS-232, Wand Emulation or IBM 46XX host is
used, select that host type from the programming bar codes that follow. If
Keyboard Wedge is selected, also select a country keyboard type from
the following pages.
Keyboard Wedge Host Type
Symbol LS7808 Horizontal Slot Scanner
Set Defaults
IBM PC/AT & IBM PC Compatibles
page 27 to select the IBM Hand-Held