Sata Configuration - Supermicro X10QBL-CT User Manual

X10QBL-CT/X10QBL User's Manual
Legacy USB Support (Available when USB Functions is not Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy sup-
port if USB devices are not present. Select Disabled to have USB devices available
for EFI (Extensive Firmware Interface) applications only. The settings are Disabled,
Enabled and Auto.
USB 2.0 Controller Mode
Select HiSpeed for the USB 2.0 controller to operate at the HiSpeed mode (480Mb
per second). Select FullSpeed for the USB 2.0 controller to operate at the Full Speed
mode (12Mb per second). The options are Full Speed, and HiSpeed.
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will
be claimed by the EHCI driver. The settings are Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support which will provide complete
USB keyboard legacy support for the operating system that does not support Legacy
USB devices. The options are Disabled and Enabled.
USB Controller 0 Enable
Select Enabled to enable USB Controller 0 which supports USB Port 0 to Port 7.
The options are Disabled and Enabled.
USB Controller 1 Enable
Select Enabled to enable USB Controller 1 which supports USB Port 8 to Port 13.
The options are Disabled and Enabled.

SATA Configuration


When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA devices that are supported by the Intel PCH chip and displays the
following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH chip. The options are Enabled and Disabled.
Configure SATA as
Select IDE to configure a SATA drive specified by the user as an IDE drive. Select
AHCI to configure a SATA drive specified by the user as an AHCI drive. Select
4-20