Peripheral Devices - Supermicro X10QBL-CT User Manual

X10QBL-CT/X10QBL Motherboard User's Manual
Peripheral
Devices
BIOS
Power
Management
SAS Connections (For X10QBL-CT only)
•
SAS 3.0
•
RAID
IPMI 2.0
•
IPMI 2.0 supported by ASpeed AST 2400
Serial Port & COM Port Header
•
One (1) Fast UART 16550 serial port header for front
access (COM2),
•
One (1) COM port (COM1) on the IO back panel
USB Devices
•
Two (2) USB 2.0 ports on the I/O back panel (USB
0/1)
•
One (1) USB 2.0 on the I/O back panel (USB 2)
•
Two (2) USB 2.0 headers provide four USB 2.0 con-
nections for front access support (USB 4/5, USB 6/7)
•
One (1) USB 2.0 Type A for front access support
(USB 8)
•
16 MB SPI AMI BIOS
•
APM 1.2, ACPI 3.0/4.0, USB keyboard, Plug & Play
(PnP), BIOS rescue hotkey, riser card auto-detection,
RTC (Real-Time Clock) wake-up, PCI Firmware 3.0,
SPI dual/quad speed support, and SMBIOS 2.7 &
later
•
ACPI/ACPM power management
•
S4, S5 support
•
Wake-on-Ring (WOR) & Wake-on-LAN (WOL) sup-
port
•
Power-on mode for AC power recovery
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel Intelligent Power Node Manager 3.0 (Avail-
®
able when the Supermicro Power Manager [SPM] is
installed and special power supply is used.)
•
Management Engine (ME)
1-8
•
SAS 0-3 (JSAS1),
•
SAS 4-7 (JSAS2)
supported by the LSI 3008 SAS
controller
RAID 0, 1, 10
SM Flash UEFI BIOS
®