Supermicro X10QBL-CT User Manual page 80

X10QBL-CT/X10QBL User's Manual
Enhanced Halt State (C1E)
Select Enabled to use Enhanced Halt-State technology, which will significantly
reduce the CPU's power consumption by reducing the CPU's clock cycle and
voltage during a Halt-state. The options are Disable and Enable.
Monitor/Mwait
Select Enabled to enable the Monitor/MWait instructions. The Monitor instruc-
tion monitors a region of memory for writes, and MWait instructions instruct the
CPU to stop until the monitored region begins to write. The options are Enable
and Disable.
CPU T State Control
ACPI (Advanced Configuration Power Interface) T-States
Select Enable to support CPU throttling by the operating system to reduce power
consumption. The options are Enable and Disable.
 CPU Advanced PM Turning
 Energy Perf BIAS
Energy Perf BIAS
Energy Performance Tuning
Use this feature to select whether the BIOS of operating system chooses energy
performance BIAS Tuning. The options are OS and BIOS.
Energy Performance BIAS Setting.
Use this item to set the energy performance bias, which overrides the operating
system setting. The options are Performance, Balanced Performance, Balanced
Power, and Power.
Workload Configuration
Use this item to optimize the workload characterization. The recommended set-
ting is Balanced. The options are Balanced and I/O sensitive.
4-10