Supermicro X10QBL-CT User Manual page 17

System
Health
Monitoring
System
Management
Dimensions
Note: For IPMI Configuration instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
System Health/CPU Monitoring
•
Onboard voltage monitoring for +1.2V, +3.3V, 3.3V
standby, +5V, +5V standby, +/-12V, CPU core,
memory, chipset, HT, and battery voltages
•
CPU/System overheat LED and control
•
6+1 switch-phase voltage regulator
•
CPU Thermal Trip support
•
Status Monitor for speed control
•
Status Monitor for On/Off control
Fan Control
•
Fan status monitoring via IPMI connections
•
Single Cooling Zone
•
Low noise fan speed control
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Configuration Interface)
2.0/TSI support
•
Chassis intrusion auto detection
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor® 5
•
SuperDoctor 5, Watch Dog, NMI
•
Chassis Intrusion header and detection
•
16.40" (L) x 16.79" (W) (426.47 mm x 424.18 mm)
1-9
Chapter 1: Overview