Super Io Configuration; Serial Port 1 Configuration - Supermicro X10QBL-CT User Manual

X10QBL-CT/X10QBL User's Manual
TPM Active Status
This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.
TPM Owner Status
This item displays the status of TPM Ownership.
Intel TXT Support
Select Enabled for Intel Trusted Execution Technology support. The options are
Enabled and Disabled.
ME (Management Engine) Subsystem
This feature displays the following ME Subsystem Configuration settings.
General ME Configuration
Operational Firmware Version
Recovery Firmware Version
ME Firmware Features
ME Firmware Status #1
ME Firmware Status #2
Current State
Error Code
Super IO Configuration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
Serial Port 1 Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 1 (COM).
Change Port 1 Settings
This option specifies the base I/O port address and the Interrupt Request address
of Serial Port 1 (COM). Select Disabled to prevent the serial port from accessing
any system resources. When this option is set to Disabled, the serial port becomes
4-26