Supermicro X10QBL-CT User Manual page 82

X10QBL-CT/X10QBL User's Manual
LAN1/2
Use the items below to configure the PCI-E settings for a PCI-E device
installed on a LAN connection specified by the user.
The following items will display:
•
PCI-E Port Link Status
•
PCI-E Port Link Max
•
PCI-E Port Link Speed
Link Speed
Use this item to select the PCI-E link speed for the PCI-E port specified by the
user. The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), GEN3 (8 GT/s), and
Auto.
PCI-E ASPM Support
Select Enable to support the Active State Power Management (ASPM) level for
a PCI-E port specified by the user. Select Disabled to disable ASPM support.
The options are Auto, Disable, and L1 Only.
L-SAS0-3(JSAS1)/L-SAS4-7(JASA2)
Use the items below to configure the PCI-E settings for a PCI-E device
installed on a SAS connection specified by the user.
The following items will display:
•
PCI-E Port Link Status
•
PCI-E Port Link Max
•
PCI-E Port Link Speed
Link Speed
Use this item to select the PCI-E link speed for the PCI-E port specified by the
user. The options are GEN1 (2.5 GT/s), GEN2 (5 GT/s), GEN3 (8 GT/s), and
Auto.
PCI-E ASPM Support
Select Enable to support the Active State Power Management (ASPM) level for
a PCI-E port specified by the user. Select Disabled to disable ASPM support.
The options are Auto, Disable, and L1 Only.
4-12