Adjusting Humidification And Dehumidification Settings With; Communicating Outdoor Units - Lennox iComfort Wi-Fi Installer's System Setup Manual

Adjusting Humidification and Dehumidification Settings with

Communicating Outdoor Units

HUMIDIFICATION SETTINGS — FEATURE SCREEN
1. From the Main Screen, touch the right arrow icon to go the the
Features screen.
2. From the Features screen, select system settings.
3. Touch the button of the humidification controls you want to adjust; if it
says humidifier OFF, one touch will display a selection for ON.
4. When you touch the set-to button, the arrows appear, allowing you to
change to the desired humidity percentage setting.
SYSTEM SETTINGS
Appears only
humidification
when heat pump
settings
is present
heating
humidifier
mode
is ON
COMFORT
Wi-Fi
9:39 am Aug 15, 2012
Figure 14. System Settings Screen (Example Only) -
Communicating Outdoor Unit
DEHUMIDIFICATION SETTINGS — SYSTEM DEVICES SCREEN
Pre-adjustment REQUIREMENTS:
• First, the device has been installed
• Second, from the "Add or Remove Non-communicating equipment?",
touch next.
• Third, in the "Adjust a setting..." screen, configure the device as
follows:
507341-01
dehumidification
settings
%
ClimateIQ %
35
40
setting
MOD
set to
set to
Select the humidity
level that matches
your regional weather
1. In the "system devices" list, use the arrows to highlight System. Touch
edit.
2. Humiditrol
Humiditrol Comfort Adjust. The current value defaults to Maximum
Overcooling. Touch edit.
3. Humiditrol
overcooling level; touch save. (After saving, check that the current
value now shows the new selection).
4. Use arrows to highlight Min Dehumidification Setpoint; touch edit.
Note the current value (e.g. 45).
5. Use arrows to make changes; touch save. (After saving, check that the
current value now shows the new selection).
6. Touch the back button to return to "Adjust a setting..." screen.
DEHUMIDIFICATION SETTINGS — FEATURE SCREEN
1. From the Main Screen, touch the right arrow icon to go the the
Features screen.
2. From the Features screen, select system systems.
humidifier
3. Touch the ClimateIQ setting button. Available options when selected
display
are selection for DRY, MODERATE and HUMID.
is ON
4. Selecting HUMID bring on the set-to button. When you touch the
set-to button, the arrows appear, allowing you to change to the desired
de-humidifier percentage setting.
SYSTEM SETTINGS
?
Appears only
when heat pump
is present
heating
mode
COMFORT
Wi-Fi
9:39 am Aug 15, 2012
Figure 15. Humidifier Controls (Communicating Outdoor Unit)
14
®
only—In the "System" list, use the arrows to highlight
®
only—Touch one of the radio buttons to select the
humidification
dehumidification
settings
%
35
ClimateIQ
humidifier
setting
is ON
set to
MOD
(default is ON) (default is DRY)
Select the humidity
level that matches
your environment
settings
humidifier
%
40
display
is ON
set to
(default is ON)
?