Adjusting System Settings - Lennox iComfort Wi-Fi Installer's System Setup Manual

Adjusting System Setting
SET TIME AND DATE
Use the arrows to select Time and Date; touch edit to proceed to the "Set
current time and date" screen.
When "Time and Date" screen appears, enter the correct date as follows:
• Use the left and right arrows to change the month and year.
• Touch a day of the month to select it.
• Touch on the hour or minute; up down arrows appear to allow change.
• Touch the am/pm field to toggle it between am and pm.
• When the correct date and time is set, touch save to save settings and
return to previous settings screen.
Touch next to continue to next screen.
CIRCULATE FAN ON TIME SETTING
"Circulate" is enabled on the user's home screen or system settings page.
It keeps air circulating from 15% to 50% percent of time. The following
settings approximate how long the fan will run at these typical settings:
15% (9 minutes fan run time per hour)
25% (15 minutes fan run time per hour)
35% (21 minutes fan run time per hour)
45% (27 minutes fan run time per hour).
NOTE - If the circulate fan mode is on, a timer is set to measure all the time
that the fan is blowing, regardless if it is running to deliver heating or cooling
or just for air circulation.
DEALER NUMBER
Either the dealer number or phone number is required. Once either number is
entered, all other fields will automatically be populated once the thermostat
has been registered during the Wi-FI setup procedure later on in this
instruction (if the dealer has an account with Lennox already).
507341-01
NOTE - Dealer number is the dealer's Lennox account number. Dealer
phone number is the dealer's main office phone number.
1. Use the arrows to scroll down to the Dealer Number or Dealer Phone
setting. Press the edit button.
2. Enter the Dealer Number or Dealer Phone Number using the
on-screen keyboard. Press save to continue.
NOTE: If a Dealer Number or Dealer Phone Number is not entered and the
next button is selected, a pop-up warning screen will appear.
3. Press yes to continue to the System Devices screen. Press no to
return to the system settings screen.
Please enter your DEALER PHONE NUMBER or DEALER NUMBER
If you do not enter either, the thermostat will not show up on
DaveNet and you will not be able to remotely monitor the system
status or receive email alerts when there is a problem.
The dealer number is your Lennox account number) i.e
A12345). Your dealer phone number should be the main office
phone number associated with your dealership. If you have any
questions, please contact your Lennox representative.
Are you sure you want to proceed? Are you sure you want to proceed?
Figure 3. Dealer Number Warning
The following table lists all of the installer configurable system level
parameters available from the installer setup screens. After adjusting
system settings, select next to continue.
4
WARNING WARNING
yes
no