Adjusting Room Temperature, Away Mode, Clock And Weather - Lennox iComfort 10F81 Homeowner's Manual

Adjusting Room Temperature, Away Mode, Clock and Weather

Adjust temperature when programming is OFF —
programming is OFF, the system mode button (shown in figure 21, labeled
heat or cool) indicates a manual mode (no mention of "program"). In this
mode, touch one of the two set temp buttons to change the temperature
setting. The up/down arrows appear, allowing you to adjust the "cool to" (or
"heat to") values to the desired temperature setting.
This setting will remain until you decide to change it again. (The inset shows
an alternate configuration of button layout in non-program mode.)
indoor temperature set temp
75
cool-to
70
heat to
indoor humidity is 41%
touch
cool-to
button
system is cooling
Wi-Fi 9:39 am May 23, 2012
Figure 21. Adjusting Temperature with NO Program Running
Away Mode (Vacation) —
screen (upper right-hand corner) sets the system for manual operation and
allows you to set the thermostat for energy-saving operation while you are
gone for an extended period of time. In this mode, the system will only come
on if the indoor temperature falls below a set value in the heating mode (62º F
default), or if the indoor temperature rises above a set value in the cooling
mode (85º F default). You may adjust these settings as desired (see figure
22). To exit the away mode, touch cancel away mode.
(system
enter
mode button)
away
heat
or
cool
set temp
fan is
75
AUTO
fan is fan is
AUTO OFF
cool-to
use arrows
to change
temperature
alternate
cool-only button
layout
? ?
The enter away mode button on the home
When the
9:39 am May 23, 2012 9:39 am May 23, 2012
Wi-Fi
cool Figure 22. Adjusting Temperature with Program Running
only
fan is
AUTO
indoor temperature
indoor humidity is 41%
system is cooling
9:39 am May 23, 2012 9:39 am May 23, 2012
Wi-Fi
Figure 23. Adjusting Temperature with Program Running
Page 15
system is currently using energy saving AWAY settings
indoor temperature set temp
82
cool-to
60
heat to
use arrows to
change
temperature
(Away Mode)
(other options menu)
set temp
75
cool-to
72
heat to
select an option or do nothing to
accept the default "Program
d"hold until next period"
use arrows to
change
temperature
Program hold until
next period
(other options)
®
iComfort Wi-Fi 7-Day Programmable Communicating Thermostat
cancel
away
? ?
program hold until next
enter
program setting
away
other options include
1hr 2hr
8hr 24hr
custom
fan is fan is
AUTO OFF
cancel
? ?