Panasonic AW-HE100E Operating Instructions Manual page 39

Genlock adjustment
5
Press the [] or [] button to make the
"SC Coarse" or "SC Fine" value blink.
Use the "SC Coarse" item to perform coarse
adjustments, and the "SC Fine" item to perform fine
adjustments.
6
Press the [] or [] button to change the
value, and adjust so that the colour phase
is aligned.
7
Press the [MENU] button for two seconds.
The menu display is exited.
8
Press the [MODE] button.
The mode is switched to the camera picture display.
When doing the adjustment
using the controller
The same operations as in steps
performing the operations using the accessory wireless
remote control" can be performed following the operation
procedure for "Basic menu operations" (pages 39 to 46).
To switch between "BAR" (colour bar display) and "CAM"
(camera pictures), press the [MODE] or [BAR/CAM] button.
38 (E)
2 7
to of "When