X84; Linked Operation; X84; Tuner; X84; Bluetooth Function - Onkyo TX-RZ3400 Instruction Manual

‰ Images flicker
• The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable,
change the output resolution on the player. Also this may be solved by changing the screen mode on the TV.
‰ Video and audio are out of synch
• Depending on the settings on your TV and connection environment, the video may be behind the audio. Press Q on the remote controller to
display "Quick Menu", select "HDMI" - "A/V Sync", and make the adjustment.

„ Linked operation

‰ HDMI linked operation does not work with CEC-compliant devices, such as a TV
• In the Setup menu of the unit, set "5. Hardware" - "HDMI" - "HDMI CEC" to "On".
• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.
• When connecting a Sharp brand player or recorder to the HDMI IN jacks, set "5. Hardware" - "HDMI" - "HDMI Standby Through" to "Auto" on the
Setup menu.

„ Tuner

‰ Poor reception or much noise
• Recheck the antenna connection.
• Move the antenna away from the speaker cord or power cord.
• Move the unit away from your TV or PC.
• Passing cars or airplanes in the vicinity can cause interference.
• If radio waves are blocked by concrete walls, etc., radio reception may be poor.
• Change the reception mode to mono (
• Operating the remote controller during AM reception may cause noise.
• You can improve reception sensitivity by changing the setting in "7. Miscellaneous" - "Tuner" - "AM Noise Cut Mode" in the Setup menu if you are
finding AM broadcasts difficult to hear.
• FM reception may be clearer if you use the antenna jack on the wall used for the TV.

„ BLUETOOTH function

• Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH-enabled device. Restart of the BLUETOOTH-enabled device may
be effective.
• BLUETOOTH-enabled devices must support the A2DP profile.
• Because a radio wave interference will occur, this unit may not be used near devices such as a microwave oven or cordless phone which use the
radio wave in the 2.4 GHz range.
• A metallic object near the unit can affect on the radio wave, and BLUETOOTH connection may not be possible.
Check the following if the problem persists after you have confirmed the above.
Contents
p112).
Connections
≫
194
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
p180)
(
( p170)
( p82)
≫