Additional Devices; Keypads; Pc5100 2-Wire Addressable Interface Module; Pc5108 Eight Zone Expander Module - DSC PC1832 Reference Manual

• Keypad lockout
• Audio capability using the PC5900 Audio Verification Mod-
ule and central station 2-way listen-in
• All modules connect to the system via a 4-wire Keybus, up
to 1000'/305m from the main panel
• Event buffer can be printed using PC5400/PC5401 RS-232
Serial Interface module
• Supports the Escort5580(TC) Telephone Interface, with
automation and lighting control
• 500 event buffer, time and date stamped
• Uploading/downloading capability
• Daylight Saving Time option

1.4 Additional Devices

If a Fault or Tamper condition occurs on a zone while the system
is disarmed, a trouble condition will be indicated. If a Fault or
Tamper condition occurs on a zone while the system is armed,
the bell will be sounded. This applies to zones and zone expander
modules, and cannot be changed. This feature will be active for
the following modules:
• PC5108
• PC5700
• PC5132
• PK55XX with a zone programmed
• RFK55XX with a zone programmed

Keypads

A maximum of 8 keypads can be connected to the control panel.
You can connect any combination of the following listed.
• PK5500/RFK5500 LCD keypad
• PK5501/RFK5501 ICON keypad
• PK5508/RFK5508 8 Zone LED keypad
• PK5516/RFK5516 16 Zone LED keypad
• LCD5511 Fixed Message LCD keypad
• LED5511Z 8 Zone LED keypad
• PC5508Z 8 Zone LED keypad
• PC5532Z 32 Zone LED keypad
• PC5516Z 16 Zone LED keypad
• LCD5500Z Liquid Crystal Display (LCD) keypad
• LCD5501Z LCD-style keypad

PC5100 2-Wire Addressable Interface Module

The PC5100 module is used to connect 2-wire addressable
devices to the system. Up to 32 2-wire addressable devices can
be added to the system.
NOTE: PC5100 v1.0 and lower modules can only support the first
32 zones on the PC1616/PC1832/PC1864 system.
NOTE: PC1616 expandable to 16 zones only.

PC5108 Eight Zone Expander Module

Eight zone expander module can be used to increase the number
of zones on the system. Up to 7 modules can be connected to
increase the system zones to a maximum of 64 (see the PC5108
Installation Instruction Sheet.)
NOTE: PC5108 v1.0 and lower modules can only support the first
32 zones on the PC1616/PC1832/PC1864 system. PC5108 v1.0 and
lower modules enroll as two modules and use up two supervisory
slots.
NOTE: Do not mix PC5108 v1.x and lower modules with PC5108
v2.0 and higher modules on the same system.
NOTE: PC1616 expandable to 16 zones only. The PC1832 expand-
able to 32 zones only.

PC5132 Wireless Receiver Module

The PC5132 Wireless Receiver module can be used to connect
up to 32 fully supervised wireless devices (see the PC5132 Instal-
lation Manual for details).
NOTE:
Only the first 32 zones on the PC1616/PC1832/PC1864 sys-
tem can be used as wireless zones.
NOTE:
PC1616 expandable to 16 zones only.

PC5200 Power Supply Output Module

The PC5200 can provide up to 1 Amp of additional power for
modules or devices connected to the control panel. Up to 4 mod-
ules can be connected to the system. Each module requires a
16.5V 40VA transformer and 4 AH battery (see PC5200 Instal-
AC
lation Instructions for details).

PC5204 Power Supply Output Module

The PC5204 can provide up to 1 Amp of additional power for
modules or devices connected to the control panel. The module
requires a 16.5V 40VA transformer and 4Ah(min.) battery. In
AC
addition, the module provides 4 programmable high current out-
puts (see PC5204 Installation Instructions for details).

PC5208 Eight Low Current Output Module

Adds 8 programmable low current outputs (50mA) to the control
(see the PC5208 Installation Instructions for details).
NOTE: If you use the main panel and the PC5208 outputs, PGM 3
will work the same as the first PC5208 output, and PGM 4 will
work the same as the second PC5208 output.

Escort5580(TC) Module

This Escort5580(TC) module will turn any touch-tone telephone
into a fully functional keypad. The module also includes a built-in
interface to control up to 32 powerline carrier type devices for
lighting and temperature control (see the Escort5580(TC) Installa-
tion Manual for details).
NOTE:
An Escort5580(TC) version 3.x or higher is needed to sup-
port more than 32 zones and/or 2 partitions.

PC5900 Audio Verification Module

The PC5900 series Audio Verification Modules provide "Talk/Lis-
ten-In" capability for audio verification of alarms. The module per-
mits the central station to monitor up to four microphones and to
communicate to the occupants through 2 separate speakers.

PC5400 Printer Module

This PC5400 Printer Module allows the panel to print all events on
the system to any serial printer. All events will be printed with the
partition, time, date and the event that occurred (see PC5400
Installation Manual for details).
NOTE:
The PC5400 v2.x and lower only supports events on parti-
tions 1 and 2, and zones 1-32.

PC5401 Serial Interface Module

The PC5401 Serial Interface Module can be used to communi-
cate with 3rd party devices (automation) through a standard RS-
232 serial connection (see the PC5401 Developer's Guide for
more information on communicating with the PC5401 module).

TL150/250/TL300 Intranet/Internet Communicators

The T-Link Ethernet Communicator provides an efficient method of
communicating via Internet/Intranet. See the T-Link TL150/TL250/
TL300 Installation Manual for more details.

Alternate Communicators

Refer to the associated Skyroute™ Installation Manual, or
GS3055-I Installation Manual for programming details.

PC5700/PC5720 Fire Module

This is a zone expansion fire module that can be used for ULC
Listed non-residential fire applications. The PC5720 can be used
as an interface between the control panel and either a serial
printer or a DVACs communication network.
NOTE: The PC5700/PC5720 enroll as two expander modules and
use two supervisory slots each.
NOTE: Do not mix PC5700 v1.x and lower modules with PC5108
v2.0 and higher modules on the same system.
3
CAN